HH-66 Glue Tarp Repair Kits Quarts

HH-66 Quart of Glue, Red, Blue, Black, Green, and Gray

Tarp Repair Instructions
1. Identify all holes or rips
2. Flip tarp to back side
3. Using scissors or sharp knife, trim all loose edges
4. Clean the damaged area at least 6″ all four sides using simple green, purple de-greaser, Comet and water. do not use gasoline, or any oil based cleaner
5. Make sure cleaned area in 100% dry
6. Cut patch at least 6″ larger than damaged area
7. Round off all corners of patch
8. Turn patch upside down (rough-side) and apply glue to rough-side and also the surrounding area of outside of patch.
9. Pick up patch and apply glue to inside of out-lined patch area
10. Allow glue on patch and tarp to dry to a light haze. confirm that glue on both area’s are almost dry.
11. Apply patch to damaged area and smooth out by hand. ( for best results use round pipe and press all air bubbles out ). allow patch to dry for at least 30 minutes
12. In some case apply baby powder to outside of surrounding area to prevent patch from sticking to other patches.
Kit Includes 1 quart HH-66 and 1pc 3′ x 5′ section of fabric.

Please note these items have to be quoted to ship. Please call our office 972-723-8000 or email @ info@dctarp.com