-
Edge Protector Placement Tool with Extension
$39.25 – $157.00 This product has multiple variants. The options may be chosen on the product pageEdge Protector Placement Tool with Extension
The Ancra corner protector placement tool is designed to provide an easy and secure means for positioning corner protectors in place on the top corners of cargo on a flatbed trailer. No need to climb on the load or up onto a ladder as the user stays firmly on the ground while positioning the corner protectors.
The durable head design of the Ancra corner protector placement tool is impact resistant and the H.D.P.E. and aluminum material will remain rust free. The steel extension handle has a high-visibility yellow powder-coated finish, and the extension pole collapses to make the overall length of the tool 62-in. for easy storage. The center recessed area at the top end of the tool can be used to reposition cargo straps over the load, while the tool head is designed from two high-density polyethylene pieces that is light weight, durable, impact resistant at high and low temperatures, and corrosion free.
The Ancra corner protector placement tool works with all types of corner protectors.
-
Edge Protector Steel with Rubber Lining 6″ Wide
$7.75 – $155.00 This product has multiple variants. The options may be chosen on the product pageEdge Protector Steel with Rubber Lining 6″ Wide
Use with any Sharp Corners, Coil Securement, I-Beam Securement. Protects Load from Chains during tie downs.
Weight 1.5lbs each.
-
ERGO 360 Boxed End Winch Bar
$29.00 – $290.00 This product has multiple variants. The options may be chosen on the product pageERGO 360 Boxed End Winch Bar
See what a difference a bend in the bar makes.
The Ergo 360° Bar raised winch bars to a new level with a patented ergonomic
design that maintains parallel alignment of handle and tip. You can rotate
the bar for optimum leverage without removing it, secured in the winch cap through the mushroom tip. Easy to carry and handle, the Ergo 360° is available in standard, combination
and combination box end models. Combination bars can be used to release
tension on chain binders. Use caution to avoid injury.
Not to be used as a cheater bar.Combination Box End Painted.
Weight: 6.0 lbs./2.72 kg. -
ERGO 360 Standard Winch Bar
$24.75 – $247.50 This product has multiple variants. The options may be chosen on the product pageERGO 360 Standard Winch Bar
See what a difference a bend in the bar makes.
The Ergo 360° Bar raised winch bars to a new level with a patented ergonomic
design that maintains parallel alignment of handle and tip. You can rotate
the bar for optimum leverage without removing it, secured in the winch cap through the mushroom tip. Easy to carry and handle, the Ergo 360° is available in standard, combination
and combination box end models. Combination bars can be used to release
tension on chain binders. Use caution to avoid injury.
Not to be used as a cheater bar.Standard Painted.
Weight: 5.0 lbs./2.27 kg. -
ERGO 360 Tube Style Winch Bar
$26.75 – $267.50 This product has multiple variants. The options may be chosen on the product pageERGO 360 Tube Style Winch Bar
See what a difference a bend in the bar makes.
The Ergo 360° Bar raised winch bars to a new level with a patented ergonomic
design that maintains parallel alignment of handle and tip. You can rotate
the bar for optimum leverage without removing it, secured in the winch cap through the mushroom tip. Easy to carry and handle, the Ergo 360° is available in standard, combination
and combination box end models. Combination bars can be used to release
tension on chain binders. Use caution to avoid injury.
Not to be used as a cheater bar.Combination Painted.
Weight: 6.5 lbs./2.95 kg. -
Sale!
EZ Load Binder 3/8″ WLL 6600 lb.
$157.00 – $1,176.00 This product has multiple variants. The options may be chosen on the product pageEZ Load Binder 3/8″ WLL 6600 lb.
Ancra 5/16-in.-3/8-in. EZ load binder makes loading and unloading with transport chain faster and easier. Made with heavy-duty steel and finished with electro zinc plating, the EZ binder can withstand loads up to 6,600 lbs. and remain reliable for years after exposure to harsh conditions. The extra-long molded grip ratchet handle provides plenty of leverage for easy operation, swivel hooks make securing chain simple, and free wheel functionality allows for a quick take up to 12-in. during tensioning. To operate, simply attach chain links to either hook and pull the lever to tighten.
The ratchet chain load binder accepts chain from 5/16-in and 3/8-in. G70 Transport Chain.
Failure to follow all instructions may result in serious personal injury, property damage and loss of life. Observe the working load limits as noted below and on tags to determine the number of tie-downs and hardware required under federal D.O.T. FMCSA 40 CFR Parts 392-393.
Use extreme caution when tensioning load binders to ensure chain links are seated securely in the hook before releasing tension on the load binder.
-
Sale!
EZ Load Binder 5/16″ WLL 5400 lb.
$133.75 – $1,070.00 This product has multiple variants. The options may be chosen on the product pageEZ Load Binder 5/16″ WLL 5400 lb.
Ratchet design is easy to tension and release. Extra long handle provides mechanical advantage, Durable contoured handle grip for comfortable operation, Heavy gauge steel construction with zinc plating, Dual solid gears distribute tension forces evenly, Free wheel function for quick take up, Quality grade 100 load chain is used in binder, Use with 5/16-in grade 70 binder chains, Swiveling grab hooks for ease of use, Will take up 12-in of chain during tension.
Weight: 11.5 lbs./5.22 kg.
WLL: 5,400 lbs./2,450 kg. -
Ez Mount Flag Kit with Spring Orange
$39.75 – $159.00 This product has multiple variants. The options may be chosen on the product pageEz Mount Flag Kit with Spring Orange
The EZ-Mount Flag Assembly Kit is machined from stainless steel with a solid aluminum rod and features a stainless steel spring receiver. Allows for quick connect and disconnect to the EZ-Mount Bracket. E Z Mount Flag Kit with Spring Orange
Improvements:
- Kit contains all parts needed for installation
- Jersey flag sewn directly to welting
- Stainless steel bracket
- Provides a 45° or 90° angle for mounting the flag assembly
- Welting allows for free rotation of flag on the staff
- Stainless steel spring receiver for fast connect/disconnect
- No need for bungees or clamps
- Mounting hardware included
-
Felt Pad Tarp Protection 12′ wide X 15′ long
$145.00Felt Pad Tarp Protection 12′ X 15′
Tarp Pad Protectors, used for tarp padding and load protection. Corner protection, Edge protection.
Tarp Pad measures 1/4″ thick. Custom sizes can made to order. please call our office for special pricing.
Weight Dry 19 lbs. Wet 19 lbs. -
Flag Bracket Clamp Set for Pole Flags
$10.50 – $21.00 This product has multiple variants. The options may be chosen on the product pageFlag Bracket Clamp Set for Pole Flags
Great for temporary or removable mounts.
- Extruded aluminum “J” clamp
- stainless steel bolts
- Great for temporary or removable mounts. Two clamps per flag recommended for highway use
- Two per bag
-
Flag Bracket Pipe Set for Pole Flag
$12.50 – $25.00 This product has multiple variants. The options may be chosen on the product pageFlag Bracket Pipe Set for Pole Flag
Simple and easy method for mounting staff flags to bumpers, trailers or equipment.
- Mounts to bumpers, fenders and trailers
- Bolt on flag mount
- Galvanized pipe with zinc plated hardware
- Two per bag
-
Fontaine Sliding Strap Winch
$30.00 – $300.00 This product has multiple variants. The options may be chosen on the product pageFontaine Sliding Strap Winch
Sliding Strap Winch, Made exclusively for Fontaine Trailers. Made strong and Durable, Works with 4″ Strap. Use Winch bar to secure. WLL 5400LBS.