SPEED BINDERS Ratchet 5/16 to 5/8

5/16″ to 3/8 Speed Binders, WLL 6600Lbs.

Extreme edge gear box placement make this the most versatile binder Speed binders has produced. Grease zerk is standard equipment. You also receive a protection ring for long life (customer installed). These are designed to work with 5/16 – 3/8 chain.

They have a skinnier hook and ring which allows for hook placement inside most stake pockets. The ultimate for the landscaper, skid loader, and mini excavator operators. Zinc coated rings, hooks and post threads. 24-to-1 gear reduced.

Long handle, extreme offset to bring the gear set closer to the operator for easier operation. The handle is a reaction bar. Needs to be in contact with the floor or equipment for proper tension retention.

This latest version is our highest quality yet. Truly the best binder on the market bar none. Gets chains tighter and is safer and faster than anything on the market. Store your end links inside the barrel when storing and they will be out of the road salt/brine and stay lubricated. Heavy/implement grade paint resistant to chipping, zinc coated, sealed gear box.

3/8″ to 1/2″ Speed Binders WLL 9200Lbs.

Extreme edge gear box placement make this the most versatile binder Speed binders has produced. Grease zerk is standard. You also receive a grease zerk protection ring for long life (customer installed). To offer some clarity, the hooks are marked 3/8-1/2 but this binder conveniently works with 5/16 chain as well. The ultimate for the steel hauler, big chain rental companies, construction, excavating, bobcats, and heavy equipment. Two inches longer handle than our standard arm, zinc-coated rings, hooks, and post threads. We are 24-to-1 gear reduced on this model. Long handle offset to bring the gear set closer to the operator for easier operation. The handle is a reaction bar. Needs to be in contact with the floor or steel for proper tension retention. This version is also the preferred model for the rental industry boom lifts, scissor lifts, JLG rough terrain lifts, bobcats, and excavators.

1/2″ to 5/8″ Speed Binders WLL 13,000Lbs.

Heavy Haul TD13GLHH Green Line Torque Drive binder. Torque Drive binders are taking the tie down market over with its innovative design, ease of use, quickness and chain tension holding abilities. This unit has a 13,000 lbs working load limit and is G70 rated. This is a 1/2-5/8 equipped binder.

Production units will be extreme offsets with zinc coated threaded posts, rings, hooks, grease zerk protection rings and a sporty green striped side plate. In stock and ready to ship.

SB DRIVE BOLTS 14MM 9/16 CH

This is a replacement bolt for the gear set. If using the recommended drill set, these should last an estimated 2,000 to 3,000 cycles. Using a 1/4 or 3/8 impact will shorten your life to half that. Drive bolts are considered wear items and are not covered under warranty. Use of 1/2 impacts voids binder warranty immediately. Here is an instructional video on drive bolt replacement.

ZERK PROTECTION RINGS PKG 10

Grease zirk protection rings, sold in lots of 10. You also get a spare grease zirk. These protection rings are standard equipment with the TD66eos/Blue Line, the TD92eos/Red Line and soon to be released TD13eos/Green Line (customer installation required). Simply remove your grease zirk, place the protection ring over the hole and re-install the grease zirk.