Side mount kit for any style headache rack, Mount Headache Rack when U-bolt kits wont work. Included in kit, 4pcs Side mount heavy duty brackets, 4pcs Rubber bolt pads, 2pcs. rubber headache rack spacers, grade 8 bolts, nuts, washers, and lock washers.
4pcs. to a kit, Weight 20 lbs.
U Bolt Headache Rack Mount Kit, Mount Headache rack to frame of truck, includes 4pcs. U-bolts, 4pcs. Dog Bones, Nuts and washers, and Rubber pads.
Weight 25 lbs. Use to Mount to any truck other than International trucks.
Heavy Duty Coil Racks, Used for transport of heavy duty coils, will support large coils, 4″ x 4″ blocks and coil pads are also available.
Weight: 16.75 lbs.
Made from 1/4″ steel
Heavy-Duty Blue Edge protector 12″ Long 8″ x 8″ Heavy Plastic
Heavy-Duty Blue Edge protector 12″ Long 8″ x 8″, Use with any load and securing with 4″ or 2″ Straps Load securement and Load protection Made From Heavy Plastic
Heavy-Duty Blue Edge protector 24″ Long 8″ x 8″, Use with any load and securing with 4″ or 2″ Straps Load securement and Load protection Made From Heavy Plastic
HH-66 Quart of Glue, Red, Blue, Black, Green, and Gray
Tarp Repair Instructions
1. Identify all holes or rips
2. Flip tarp to back side
3. Using scissors or sharp knife, trim all loose edges
4. Clean the damaged area at least 6″ all four sides using simple green, purple de-greaser, Comet and water. do not use gasoline, or any oil based cleaner
5. Make sure cleaned area in 100% dry
6. Cut patch at least 6″ larger than damaged area
7. Round off all corners of patch
8. Turn patch upside down (rough-side) and apply glue to rough-side and also the surrounding area of outside of patch.
9. Pick up patch and apply glue to inside of out-lined patch area
10. Allow glue on patch and tarp to dry to a light haze. confirm that glue on both area’s are almost dry.
11. Apply patch to damaged area and smooth out by hand. ( for best results use round pipe and press all air bubbles out ). allow patch to dry for at least 30 minutes
12. In some case apply baby powder to outside of surrounding area to prevent patch from sticking to other patches.
Kit Includes 1 quart HH-66 and 1pc 3′ x 5′ section of fabric.
Please note these items have to be quoted to ship. Please call our office 972-723-8000 or email @ info@dctarp.com
HH-66 vinyl Cement is used primarily for Tarp repair, The Product is Blended to be a long lasting application for tarp repairs. Please Clean Tarps with a mild Abrasive product (Comet and water, 409, or Purple De greaser). Make sure the Vinyl is completely dry, Apply Glue using Paint Brush or Roller to Tarp and patch. Let Glue dry until tacky. Apply patches and let dry. Apply Baby Powder to outside of Patch and on Tarp, This will prevent Patch or Tarp from sticking together after the Glue has set.
Please note these items have to be quoted to ship. Please call our office 972-723-8000 or email @ info@dctarp.com
Hotshot / Steel Tarps 20′ x 20′ 3 Rows Dee rings 4 sides
20′ x 20′ Hotshot steel tarps, Made for any type of load cover. 3 rows Dee Rings all 4 sides and grommets on bottom, on 24″ centers. Material 16oz, 14oz Vinyl. Weight 50lbs.
Hotshot / Steel Tarps 20′ x 24′ 3 Rows Dee rings 4 sides
20′ x 24′ Hotshot steel tarps, Made for any type of load cover. 3 rows Dee Rings on sides, 2 rows Dee Rings on Ends, and grommets on bottom, on 24″ centers. Material 16oz, 14oz Vinyl. Weight 63lbs.
-10′ x 15′ Flat Sheet, 18oz Black with 2 rows d-rings all 4 sides and Grommets on Bottom, Dee rings and Grommets on 24″ centers. Use with any Tarp to complete the Covering. Single pallet Covering, All Purpose Tap.