Tarp Repair Kits | Glue and Tarp Tape
-
HH-66 Glue Tarp Repair Kits Quarts and 1 Yard Fabric
HH-66 Glue Tarp Repair Kits Quarts
HH-66 Quart of Glue, Red, Blue, Black, Green, and Gray
Tarp Repair Instructions
1. Identify all holes or rips
2. Flip tarp to back side
3. Using scissors or sharp knife, trim all loose edges
4. Clean the damaged area at least 6″ all four sides using simple green, purple de-greaser, Comet and water. do not use gasoline, or any oil based cleaner
5. Make sure cleaned area in 100% dry
6. Cut patch at least 6″ larger than damaged area
7. Round off all corners of patch
8. Turn patch upside down (rough-side) and apply glue to rough-side and also the surrounding area of outside of patch.
9. Pick up patch and apply glue to inside of out-lined patch area
10. Allow glue on patch and tarp to dry to a light haze. confirm that glue on both area’s are almost dry.
11. Apply patch to damaged area and smooth out by hand. ( for best results use round pipe and press all air bubbles out ). allow patch to dry for at least 30 minutes
12. In some case apply baby powder to outside of surrounding area to prevent patch from sticking to other patches.
Kit Includes 1 quart HH-66 and 1pc 3′ x 5′ section of fabric. -
HH-66 VINYL CEMENT 1 Quart, 1 Gallon, 5 Gallon
HH-66 VINYL CEMENT 5GAL. 1GAL. AND QUARTS
-1 QUART CANS WITH BRUSH
-1 GALLON CANS
-5 GALLON CANS
HH-66 vinyl Cement is used primarily for Tarp repair, The Product is Blended to be a long lasting application for tarp repairs. Please Clean Tarps with a mild Abrasive product (Comet and water, 409, or Purple De greaser). Make sure the Vinyl is completely dry, Apply Glue using Paint Brush or Roller to Tarp and patch. Let Glue dry until tacky. Apply patches and let dry. Apply Baby Powder to outside of Patch and on Tarp, This will prevent Patch or Tarp from sticking together after the Glue has set.
-
Tarp Repair Tape Roll 6″ x 50′ Red,Blue,Black,Green
Tarp Repair Tape Roll 6″ x 50′ Red,Blue,Black,Green
Repair Tape by the Roll 6″ x 50′, RED, BLUE, BLACK AND GREEN
Tarp Repair Instructions
1. identify all holes or rips
2. flip tarp to back side
3. using scissors or sharp knife, trim all loose edges
4. clean the damaged area at least 6″ all four sides using simple green, purple de-greaser, Comet and water. do not use gasoline, or any oil based cleaner
5. make sure cleaned area in 100% dry
6. cut patch at least 6″ larger than damaged area
7. round off all corners of patch and peal paper from back of tape and apply to damaged area. smooth out all bubbles and let dry. -
Tarp Tape Patch Kits 6″ x 5′ Red,Blue,Black,Green
Tarp Tape Patch Kits 6″ x 5′ Red,Blue,Black,Green
Tarp Tarp Kits, RED, BLACK, BLUE, AND GREEN
Tarp Repair Instructions
1. identify all holes or rips
2. flip tarp to back side
3. using scissors or sharp knife, trim all loose edges
4. clean the damaged area at least 6″ all four sides using simple green, purple de-greaser, Comet and water. do not use gasoline, or any oil based cleaner
5. make sure cleaned area in 100% dry
6. cut patch to fit
7. round off all corners of patch, and apply using hand pressure.